Geosoft mapping software for geophysics, geology, geochemistry
 

Oasis montaj 6.0 Release Notes

April 30, 2004

New in 6.0

montaj Extensions

montaj Plus Extensions

Enhancements and Bug Fixes

What's new in Oasis montaj 6.0?

Oasis montaj 6.0 includes significant enhancements to software usability, interface and map editing functions. However, all menus and GXs remain the same as in version 5.1.8, to ensure a minimal learning curve for existing users.

eLicensing

No More Red Disk

Oasis montaj 6.0 has replaced the Red Disk licensing technology with a new electronic licensing (eLicensing) model. The new eLicensing technology provides current users with a Provisional license, enabling both systems (Om5.1.x and Om6.0) to be run concurrently for up to 6-months.

Provisional License

This 6-month transition period begins with the install of Oasis montaj 6.0. A Provisional license will be created when the eLicensing software queries our server and validates the GC (GA, GL, GE or GS) number on your Red Disk. Once validated, the license server and software then creates a Provisional license key for Oasis montaj 6.0 (e.g. ABC123DE). This 8 digit alpha-numeric key will enable you to run the Oasis montaj 6.0 software, for up to 6-months.

At any time during the 6-month transition period you can surrender your Red Disk using the Surrender RED license Disk option on the File|License menu. You must choose after the 6 month time period to upgrade to Oasis montaj 6.0 or stay with Oasis montaj 5.1.x, as the Provisional license will expire at that point.

Please note the new license agreement, which specifically spells out the 1 user, 1 license concept of our licenses. The user is prompted when retrieving the license to confirm that the user holding the license is the person downloading it.

New License Options

New license options under File/License enable you to manage your license:

  • Show computer ID – Displays computer ID
  • View license – Displays users license
  • Update license – Enables license to be updated from license server
  • Park license – Enables license to be parked on server, and then retrieved later
  • Transfer license – Enables license to be transferred to a different computer ID
  • Lock License – Enable license to be locked on the current computer
  • Unlock License – Enables license to be unlocked from the computer using the ‘License key’

eLicensing Questions

More information about Geosoft's new eLicense is available in the Top Support Questions online help.

top

 

Software Reconfiguration

Oasis montaj mapping and processing software

With 6.0, Oasis montaj now delivers high-level performance as a stand-alone mapping and processing system. The system combines Geosoft's high-performance database with advanced mapping and processing features.

It includes a complete range of gridding algorithms: Minimum Curvature (Random), Line (Bi-Directional), Trended gridding, Gradient gridding, Tinning (Natural Neighbour, Linear and Nearest Neighbour) and Kriging.

Oasis montaj 6.0 also includes Geosoft's advanced grid utilities: Grid Filters, Grid peaks, Grid Boolean operators to merge overlapping grids or display the parts of grids that overlap, Grid math functions, Grid volume and Grid mask utilities.
> See full Feature Sheet

New montaj Extensions

Geosoft add-on tools and applications have been reconfigured into 11 distinct extensions to Oasis montaj. With the new extensions, we have combined complimentary tools to eliminate overlapping functionality and enhance value for montaj users. All extensions require Oasis montaj 6.0. There are no other software dependencies. Examples of new and/or enhanced extensions are provided below. See montaj extensions for a full listing.

montaj Geophysics

The montaj™ Geophysics extension includes Spatial ID and ID Non-linear filters, 1D FFT filters, Lag, Heading and Magnetic Base Station Correction and a range of Geostatistical analysis functions, including Histogram, Scatter, Triplot and Probability Analysis and Data Subsetting. > See full Feature Sheet

montaj Geochemistry

The montaj™ Geochemistry extension provides GeoChem Data Handling, GeoChem QA/QC, Geochem Statistical Analysis, including Histogram, Scatter, Triplot and Probability analysis and Data Subsetting. > See full Feature Sheet

montaj Drillhole Plotting

The montaj™ Drillhole Plotting extension now combines all drillhole mapping functionality into one comprehensive package. It includes drillhole plotting, plan and section creation, 3D visualization, strip log and compositing tools. > See full Feature Sheet

montaj Geophysics Levelling

The montaj Geophysics Levelling extension now includes a microlevelling algorithm in addition to Line levelling correction, Line intersections system, Lag, heading and base station corrections and International Geomagnetic Reference Field (IGRF) correction.
> See full Feature Sheet

montaj Grav/Mag Interpretation

The montaj Grav/Mag Interpretation extension combines Geosoft's 3D Euler processing routines with these specialized and proven processing functions: Keating Magnetic Correlation Coefficients, Source Edge Detection and Source Parameter Imaging.
> See full Feature Sheet

top

Oasis montaj Viewer

The Oasis montaj Viewer, Geosoft’s downloadable software product, enables users to view Geosoft databases, Geosoft grids and a variety of common image and data exchange formats. The Viewer (equivalent to the Oasis montaj 5.1.x Interface) now has a separate install and can be run concurrently with a licensed version of Oasis montaj. The Viewer, however, can not be upgraded to a licensed version.

top

Project Explorer

The new Project Explorer tool enables users to browse as well as open any project (workspace) item.  The new project file (*.gpf) is used to keep track of all information related to a working project. Some of the highlights of the Project Explorer are:

  • Keeps track of all files and information related to the project. Note that, in the past, file information was maintained in the file system and the user had to keep track of what the files were
  • Project Explorer tools include; Tools (3D Tool, Edit Bar, Project Explorer and New! Undo/Redo Map Editing Tool), Toolbars (Database Tool Bar, Map Edit Bar, Map Tools Bar, Script Bar, Standard Bar ) and the new Auxiliary Tools enable Histograms, Scatter Plots etc. to be saved for later use
  • File locations displayed in popup dialog when you mouse over item in the Project Explorer
  • File locations displayed in popup dialog when you mouse over item in the Project Explorer
  • Data Description Tool enable users to add description to project items
  • Grids appear in the Project Explorer under "Grids". Opening a grid opens a view of the grid in its own internal "map". A grid map view is just like a real map and can accept any graphics that a map can. It can also be saved as a map, in which case the map will appear in the "Map" section of the Project Explorer

Workspaces and Project files

Workspace files (*.gws) used in Oasis montaj prior to version 6.0 can be easily converted to Project files (*.gpf) simply by opening them in Oasis montaj 6.0.  On the Open Project dialog (File|Project|Open) select File of Type as “Workspaces (*.gws)” and when asked if you want to convert the old workspace into a new Oasis montaj project file, select “Yes”. The workspace file will be converted to a project file and all associated workspace information will be transferred to the new project file.

top

Enhanced Metadata Capabilities

  • Enhanced metadata capabilities enable access to ‘Properties’ of items displayed in Project Explorer
  • Upgraded “advanced’ settings (Edit/Settings/Advanced) replaces Geosoft.ini file (now displayed in Metadata Browser)

top

New ‘Light table’ Capabilities

New ‘Light table’ element is based on a new generation of rendering capabilities. Each group or layer has individual transparency settings (controlled from the Map View/Group manager). These transparency settings affect both 2D raster images and vector line work

top

Upgraded Mapping Capabilities

  • New View/Group manager
  • Zoom to selection
  • Zoom in and zoom out buttons
  • Undo/Redo Map Editing Tool
  • Editing tools to draw circles/ellipses and n-sided polygons
  • Draw open polylines from a file
  • Moving the vertices of polygons, lines, polylines, rectangles
  • Add points on vertices
  • New polygon edit bar. Exclusion zones, and editing of these zones
  • Multiple clip (mask) regions in a map
  • Automatic display of new grids to a temporary map for quick viewing with default image display options
  • Short cut / hot keys (listed in the right mouse button pop up menu)
  • Hot key for next or previous group

top

Signed Geosoft GXs

All Geosoft GXs are signed. A Geosoft signed GX is a GX written and tested by Geosoft. It contains no viruses or code that can harm your system. As a user you can trust that this GX works and is safe to use. Non-signed GXs will generate a report warning the user that there could be a problem with the GX or its contents, and that Geosoft did not test or create this GX.

top

More new features...

  • Recent Projects & recent Geosoft data files available under File menu
  • Set projection has option to set channels as current X, Y
  • Warning added to ensure that you do not unknowingly attempt to reproject between datums without specifying a local datum transform. It is possible, and often necessary to define coordinate systems without local datum transform information. In such cases the coordinates should only be used on the original datum
  • Added the EGM96 geoid model, which provides a gravity-based estimate of the geoid for the entire world at a 15 minute interval
  • Now display up to 5 profile windows in the database profile display (enabling 32 profiles per window)
  • Reverse line selection option (selected lines become unselected and unselected lines become selected)
  • You can get out of the line and channel selection lists by clicking anywhere outside of it! You no longer need to hit escape!!
  • Menus now display icons where appropriate
  • Import Maxwell plate file
  • New TIN gridding method “Nearest Neighbour” (current TIN gridding methods are Linear and Natural Neighbour)
  • Export of flight and date information to XYZ files
  • Add a DAP server from the “Get DAP Data” dialog

top

montaj Extensions

Drillhole Plotting Upgrades

  • New ODBC Import
  • New project refresh capability provides a single-step method for re-importing an entire drillhole project in one go, with the option to overwrite or append/merge to the existing databases
  • Drillhole import now enables the merging of data from contiguous from-to intervals
  • Text bands are now case sensitive (wild cards are still acceptable)
  • Bar graphs and profiles can now be filled with zone-coloured fill, with the colour zones being determined by any channel (not necessarily the one being plotted as a bar or profile)

top

Geochemistry Upgrades

The geochemistry analysis tools (Histogram, Scatter, Probability and Triplot) have been upgraded and can now be docked at the top/bottom or sides of the current project window. Once created these tools can now be hidden/displayed as necessary, and saved in the project when you close Oasis montaj. The tools will then be available automatically, with the same settings, the next time the project is opened.

Data linking between the Geochemistry analysis tools and the databases has been improved. Previously, the "X" and "Y" location values associated with each point in the tools were used to find the data point in the database which was "closest". This method could often give erroneous or misleading results, especially in data sets where multiple points shared the same location. Now, the line and FID value for each point are stored in the tools, so clicking on a point in a tool will now move the database selection to the correct row of data. Should the fiducials be altered (e.g. by adding/deleting rows, or sorting the data), simply use the "pump" button on the tool to refresh the data. Refreshing one tool refreshes all the tools.

A new Regression button on the scatter plot tool draws the least-squares best-fit regression line through the data. A pop-up dialog returns the slope and intercept calculated.

A new CHNORM.GX lets you create normalized versions of one or more channels. This is useful when creating multiple-component symbol plots when the dynamic range of items can vary markedly.

top

Induced Polarization

  • “Fix range" option added to the quality control tool

top

UX-Detect Upgrades

  • All UX-Detect GXs that have a Mask channel dropdown list, now includes "None" as an option
  • “Create/Reset mask channel” menu item added to UX-Detect. Creates a new mask channel, or reset an existing mask to 1

top

montaj Plus Extensions

GM-SYS

The latest GM-SYS upgrade, version 4.9.34a, is now available. This upgrade includes a number of enhancements including:

  • Users can now import and export horizons
  • Gravity data can now be viewed in micro-Gals or mGals
  • The number of decimal places can be specified for the axis labels
  • New GMSCLONE.GX can "clone" a model in a new location and extract new observed data from grids
  • The GMSPLANVIEW.GX plots a model's Plan View to a Map

top

PotentQ

The latest PotentQ upgrade, version 4.07, is now available and contains a number of enhancements including:

  • Specify the inducing magnetic field (IGRF) interactively from a world map
  • Markers added to polygon vertices that indicate ability to move under inversion
  • Vertex 0 of a polygonal cross-section body can now vary during inversion
  • New “Invert” tool enables quick set up of inversion on the vertices of polygonal cross-section bodies
  • Undo command added enabling model to revert to state prior to last “Invert” command
  • Background susceptibility added to the Background density (properties) option
  • Improved export of 2D body plans to Geosoft polygon files
  • Improved 2D and 3D DXF export you can now specify the item (model, axes, observations, etc.) added to the file
  • Spanish versions of the Getting Started and User's Guide are available online at: www.geoss.com.au the remaining Potent Help system should be completed in a few months
  • Some of the default model parameters and associated "Invert" settings have been changed to more logical values
  • On-line Help improved the Index and Text Search features now function correctly
  • Option added to File/Preferences dialog to output gravity gradients (i.e. the six gravity tensor components) in Eotvos units, as well as microgal/metre

top

Enhancements and Bug Fixes

Software enhancements and bug fixes

Oasis montaj
2364 Modified import of incorrect MapInfo files with Argentina zone 3 projection method.
2363 Abort while trying to load 32 bit TIFs. hFindData_META
2390 Abort when specifying correction width to 1 in gridstich. sGSLowFCorrectionIMU
2704 Abort when using bigrid.gx with Gradient data and a low pass filter. sSpline_VV
3061 Ability to draw an open polygon from a ply file
3276 Corrected error in Import template, cannot have more than 100 characters in the path.
3340 Extract standards gives unusable directory path in some cases
3285 Minimum curvature not working for creating section grids from array channel
3279 Plot option in array viewer doesn’t plot the displayed row.
2542 Added warnings about projection transformation without a local datum transform specified.
3041 Corrected error when adding second trend line "Cannot write to a protected channel".
2731 Improved explanation of weighting slope parameter in rangrid help.
2975 Cannot split a line based on a channel other than the XY pair.
3129 Abort when importing a DGN file. sConvertOrientWarpRev_IPJ
3222 Abort creating plan map. sPlotDataDH
2853 Abort trying to import a DGN map. sCurveEx_MVIEW
2519 Abort displaying bad grid. GetStandardHistRange_ST
2888 Abort: The thread tried to read from or write to a virtual address. sGetRange_ARCVIEW
3172 Abort while trying to print. CVU_Map::GeoPrint
3906 Abort while using refid.gx. Destr_VV
2594 Abort in GX Debugger. CDG_GXDebugger::CheckBreak
3827 Abort: SetParmS_AP when running a script that plots line paths to a map.
2878 Abort when two maps opened and went to select a group on one of them. sIsGroupHidden_MVIEW
3141 Abort while opening a corrupt GWS. CDOC_Map::OnMapeditSelect
2886 Abort while trying to export to Landmark Z-map; had wrong format for input grid. sZMapHeaderZMPXGD
2702 Abort while trying to grow some databases. sDeCompStreamWork_GS
3050 Abort while trying to import a DGN file. sTranslateComplexHeaderDGN
2574 Abort while trying to import a TAB file. sSetInfo_BASEIMG
2880 Abort while trying to send a map. SendMail_INTERNET
2741 Abort while upward continuing a grid file. SMPLoopAcross_FILLPGU
2928 Abort while trying to display a grid created by interactive windowing. GetStandardHistRange_ST
2856 Abort while trying to import RAW file. sLoadGravity_DU
3214 Abort trying to add new plane to 3D view. sIsGroupGrid_MVIEW
2583 Export to single table (access format) not working with gdb that has multiple lines and groups
2789 ECW export does not produce an ECW file
3779 Limit of field width of 14 characters when exporting to aseg-gdf format
2508 i0 template file outside working directory and greater than 100 characters gives error: Please enter no more than 100 characters.
2665 Output is a white image when region to export is selection of aggregate.
2859 Reprojection of historic data from NAD83 to NAD27, 50cm difference in X and Y
3822 Error when no data exists in the channel when using rollingstats.gx.  SetFidIncr_VV: Invalid Fiducial Increment
2703 Added support for different USGS DEM grid types: error reading integer value, parameter B2
2402 USGS PC grids convert dummies to -1e32 rather than the correct value of  1.e38 as specified in the user\ini\geosoft.ini file.
2791 Abort while opening a series of maps.  hCreatIterator_HASH.
3522 Added "Add server" button to DAP data tool
2770 When neither the GDB nor the GRD have units assigned, draw basemap assumes data in meters, and then calculates the scale bar in feet.
3799 Documentation error: Support of Import/export file types includes GIF files
2929 Grid origin shift when grid windowing of some grids.
2934 Grid outline does not work with small grids (less than 5 cells), no outline is displayed.
3864 Added support for contouring rectangular cells.
2868 Added support for SRTM30 DEM files.
2558 Creating a line channel (line only), the channel entries in those lines that are not selected are erased.
2359 GX Developer: the Fill_PGU() unable to open the reference file for smoothing flags if more than one smoothing pass is specified.
2491 String channels are not getting exported.
2540 Unpacking a map that includes a GRD will overwrite existing grids.
2825 Grid point and profile values not working with USGS DEM grids.
2385 Abort when importing an XYZ file. sDummy_VV
2742 Error: "Invalid size of 1106 by 0 in the grid ".\USGS_DEM_geographic.dem(DEM)". 

Gravity & Terrain Correction

2476

Modified longitude convention to match Scintrex CG-5

Geochemistry (Chimera)

2529

Abort while importing ASCII file with punctuated sentences. CCTL_Text::sFieldBreaks

2579

Abort after pressing the pump button while the channel colour dialog box open. CCTL_Prob::OnPaint

3449

Abort using the chhisto.gx. sSendReadMChan_SDPUMP

2580

Corrected error when merging large survey database with many string channels and assay data

2581

Added support in import wizard for single element fields with spaces.

2443

Corrected auto-redraw problem.

2506

Abort when closing a workspace that has open scatter analysis, Triplot and correlation tools. CCTL_Scat::Destroy_Scat

2362

Cannot edit symbol layer attributes created from the Histogram tool.

2824

CHSTAT.gx not calculating correct channels stats when using multiple channels

3826

Fixed Error:"OE32 Substr_STR:INVALID START LOCATION (<0)" caused by one character channel names.

Drillhole Plotting (Target)

2372

Wholeplot From-To databases, changing the names of assays in assay database, loose changes

2925

Abort while trying to plot a section view in a 3D view. hGeth3DN_MVIEW

2846

Abort trying to plot holes on any plan.

3722

Abort while plotting a drill 3d map with topo grid and bar plot. sBarGraph3dDH

3886

Wholeplot Excel import wizard not honouring all the field mapping

3238

Section view will not display in 3D view

2746

Wholeplot export does not export more than 3000 holes

3189

Defining channel itr for section data plot the cumulative % button behaves strangely

2631

Grids are created but not displayed in the 3D map of dh3d.gx.

2546

Corrected error when specifying a swing value: Please enter a number between 1 and 100000000.

2710

Corrected displaying a grid in an angled Wholeplot section

3068

Cannot draw a polygon .ply to the plan view of a section map.

3812

Back button in DH Template does not work.

4025

Final depth is different at then collar depth of a composite database.

2561

Error importing mdb files with % and ( ) in channel names

2474

QC on From-To data gives errors, but depths same.

3815

Axis labels in the Triplot Analysis are too small.

3153

No rock codes in stacked sections

2645

Added ability to colour code bar plots in Wholeplot.

2924

Abort while running the dhcompositedb.gx. sGetInfoSymb_SDB

3046

Using the import wizard a maximum of 20 fields can be set to 'not imported' at once

3156

Added zone coloured down hole bar plots
2907 Increased field width of drop down lists within strip log.
3151 Cannot save data plotting parameters for Strip Log more than once
2566 Strip log not plotting to scale.
3809 Abort while trying to plot a group from a section view into a 3D drillhole view. sIsGroupGrid_MVIEW
3542 Title block does not plot to map in Drill 3D

Induced Polarization

3807

Abort while trying to export an IP GDB to a new X, Y database. sFillN_VA

2486

Abort while using IP QC tool after choosing the channel IP1D. sListStationNPairsDg_IP

3040

Abort while using a Position Label Increment that was larger than the station spacing.  hPseudoSection_IP

3224

Abort in IP QC tool with max Y axis value lower than min Y axis value

3048

Documentation error when dealing with station numbers.

3606

Error importing IP6 file: Line 7, Invalid or unrecognized array type

3036

Added parameter: "First Station Plotted" to plot station numbers

3768

Ability to change the line number in an IP pseudosection plot.

3280

MF field was not calculated for the import of old IPDATA file

UX-Detect

2973

Incorrect database name in the target list symbol group created by uxparse.gx

2771

UXPARSE and UXPEAK GXs create groups with only part of the database name.

MAGMAP 2D-FFT

2635

Improved help in Butterworth Filter help files: wavelength cutoff value should be entered in ground units instead of inverse ground units.

2636

Corrected Microlevelling technote: the cutoff wavenumber value in the Butterworth filter should be entered in ground units.

Gridknit™

3830

Abort when running Gridknit to stitch a smaller grid within a larger one. sFindNeighboursIMU

2430

Problem with Gridknit output when dummy values inside some grids.

top

GX Developer Advances

GX Developer Advances

GX Developer now has a separate install! Geosoft’s GX Developer is a development environment that enables users to customize the Oasis montaj environment, add their own programs, and create full custom application suites that can be run from Oasis montaj.

GX Developer has been enhanced to support a full .NET development environment, and we will be moving GXs over to .NET over time. The benefit of this is that we can create richer GX dialogs and more functional GX components.

New or Modified GX Functions

Function

Description
_Clear_DMPPLY Clear/remove all polygons from the DMPPLY.
Copy_DMPPLY Copy all polygons from the DMPPLY.
CRCMap_MAP Generate an XML CRC of a MAP
CRCView_MVIEW Generate an XML CRC of a View
CRCViewGroup_MVIEW Generate an XML CRC of a Group
Create_ACQUIRE Create a ACQUIRE object
Create_DMPPLY Creates a DMPPLY object.
CreateNoTerminate_COM Create COM object.
CrossProduct_MATH Cross product of two vectors.
DefaultInt_SYS Allows a default int to be set.
DefaultReal_SYS Allows a default real to be set.
DefaultString_SYS Allows a default string to be set.
DeleteEmptyChan_ACQUIRE Delete empty channels
DeleteExtClipPLY_MVIEW Deletes an extended clip PLY object used by this view.
Destroy_ACQUIRE Destroy ACQUIRE
Destroy_DMPPLY Destroys the DMPPLY object.
DestroyEx_BF Destroy BF handle.
ExportChanCRC_DU Export a channel as XML and compute a CRC value.
ExportDatabaseCRC_DU Export a channel as XML and compute a CRC value.
ExportGridXML_IMU Export a Grid as an XML file.
ExportXML_IMU Export a Grid as an XML file.
ExtClipPLYList_MVIEW Get the names of existing extended clip PLY objects in this view as list.
FractalFilter_VVU Fractal filter a VV.
GetAzimuth_DMPPLY Get the azimuth of a given polygon.
GetDataLimits_ITR Get ITR max/min data limits.
GetExtClipPLY_MVIEW Get an extended clip PLY object used by this view.
GetExtents_DMPPLY Get the center, width and height of a given polygon.
GetGroupExtClipPLY_MVIEW Gets extended clip information for group in view.
GetGroupTransparency_MVIEW Gets the transparency value of group
GetJoins_DMPPLY Get join lines for each vertex in a specific polygon.
GetList_IPJ Get a list of parameters.
GetMETA_GIS Get the GIS META
GetNormalVectors_DMPPLY Get the normal vectors of a given polygon.
GetPlaneClipPLY_MVIEW Get the Plane Clip Region
GetPLY_MVIEW Get clipping polygons, in the base projection
GetPoly_DMPPLY Get a specific polygon from a DMPPLY object.
GetSettingsMETA_SYS Get the settings metadata object.
GetSwing_DMPPLY Get the swing of a given polygon.
GetVertex_DMPPLY Get a vertex location from a DMPPLY object.
Grterain2_TC Calculate terrain corrections (work for marine gravity too).
iCheckIntrinsic_SYS Check to see if an intrinsic object is licensed
iDelay_SYS Idle delay method.
iDiffImage_IMG Compute the Difference of two images
IGetDotNetGXEntries_SYS Get the list of entry points that this assembly has exposed to Oasis montaj.
IGetErrorMessageAP_SYS Return the error message text as a string.
IGetLicensedUser_SYS Get the licensed user name and Company
IGetNameExtClipPLY_MVIEW Get the name of the extended clip PLY object in this view.
iGetTemplateBlob_DH Retrieve the import template from the database.
IGetTemplateInfo_DH Retrieve the file, DH Table name and type from an import template.
iGetTimer_SYS return the elapsed time since the established time.
iHaveITR_DB Returns TRUE if channel has an ITR.
ImportHole_ACQUIRE Import Drillhole data acQuire database into a GDB
ImportPoint_ACQUIRE Import Point Sample data acQuire database into a GDB
ImportUBCModMsh_DU Import UBC Mod and Msh files.
iNumErrorsAP_SYS Returns the number of registered errors.
iNumExtClipPLY_MVIEW Get the number of extended clip PLY objects in this view.
iNumJoins_DMPPLY Get the number of joining lines in a DMPPLY object.
iNumPolys_DMPPLY Get the number of polygons in a DMPPLY object.
iNumVertices_DMPPLY Get the number of vertices in a polygon.
iSetExtClipPLY_MVIEW Set an extended clip PLY object used by this view.
iSupportDatumTransform_IPJ Can we transform between these two datums?
iSupported_IPJ Is this coordinate system fully supported?
Load_DMPPLY Loads a Datamine polygon file.
LoadDataParametersINI_DH Load data parameters from INI files..
LoadPlotParameters_DH Load parameters from a Job into the Drill object.
MeasureText_MVIEW Compute the bounding rectangle in view units of the text using the current attributes.
MoveVertex_DMPPLY Moves a vertex and any associated lines.
NearestVV_TIN Interp TINned values using the nearest neighbour.
Normalise3D_MATH Scale a vector to unit length.
ProjectLimitedBoundingRectangle_PJ Project a bounding rectangle with limits.
ProjectPoly_DMPPLY Project a polygon onto a vertical plane.
PutChanVVEx_DB Place the contents of a VV in a channel.
rDotProduct3D_MATH Dot product of two vectors.
RenderBitmap_MAP Render a map to a bitmap.
ReplaceNonASCII_STR Replace non-ASCII characters in a string.
ReProjectPoly_DMPPLY Recover polygon locations from 2D locations on vertical plane.
RequestPointDataAsSHP_DAP Request a random point dataset accross the DAP interface and save as Shapefile
RequestPointDataAsTAB_DAP Request a random point dataset accross the DAP interface and save as MapInfo Tabfile.
RequestServerMessages_DAP Get the error and abort files from the server
RotateVector_MATH Rotate a vector about an axis.
Save_DMPPLY Save to a Datamine polygon file
SaveDataParametersINI_DH Save data parameters to INI files..
SectionWindowSizeMM_DH Deterine the size, in mm, of the section window
SelectionTool_ACQUIRE Run the Acquire Selection Tool.
SetDestroyStatus_BF Set the flag to delete the file on close
SetGroupExtClipPLY_MVIEW Sets extended clip information for group in view.
SetGroupTransparency_MVIEW Sets the transparency value of group
SetIPJ_GIS Save the IPJ back to GIS file
SetMETA_GIS Save the META back to GIS
SetPoly_DMPPLY Set a specific polygon into a DMPPLY object.
SetSettingsMETA_SYS Set the settings metadata object.
SetTemplateBlob_DH Store the import template to the database.
Transparency_MVIEW Sets the transparency for new objects.
WriteCharsNoTerminate_COM Writes characters to the COM. Does not terminate upon error
ZValue_MVIEW Sets Z-value info.

top

< back