The main feature of the Euler3D upgrade is a new “Located Euler” method. This new method is based on our UX-Detect methodology where an analytic signal grid is first generated. From this grid, targets are identified using a peak picking routine. Euler solutions are then calculated for each identified target. The original or “Standard Euler” method will remain in the application. Users have a choice between the two methods. Users licensed to Euler 3D will automatically receive the new method.
Both Euler methods make use of a user selectable “Mask” channel (as in other applications). Channel names have been altered for better clarity (especially when comparing the two methods). Solution sets now are written to a new “group” line in the specified output database, instead of overwriting the entire solutions database each time.
The Array Channel Upgrade is comprised of a number of improvements to Oasis montaj’s ability to import, manipulate and visualize array channel information. Some of the improvements are:
The new array capabilities will be available to users based on their current license. Most of the new features only require a processing engine license, which will cover all licensed users. *However, the array filtering tools require users to be licensed for the “Basic 1D Filtering Tool”.
A gradient gridding option has been added to BIGRID enabling horizontal gradient data to be gridded. This option will be available to any user who is currently licensed to use BIGRID and the “Advanced Gridding Toolkit”.
Gridding without the cross-line gradient will interpolate the smoothest surface that honors the data along each line. However, gridding with the cross-line gradient will produce a surface that both honor the data and the measured gradient at each line. This can produce very much-improved gridded surfaces, especially for features that approach the line separation in size.
The GM-SYS Depth to Basement - Analytic Signal GX (anasig.gx), computes Analytic Signal depth solutions from magnetic (or gravity) profiles. The input profiles are interpolated to an even sample interval using the standard Oasis spline function before processing. The sample interval is the total profile length divided by the number of points in the profile. Therefore, profiles with large gaps should be split into multiple lines.
For noisy input profiles, the results can be improved significantly by filtering the input anomaly and gradient data. The Depth to Basement - Analytic Signal GX uses a Fast Fourier Transform technique to calculate the horizontal derivative if the input gradient channel is not specified.
Northwest Geophysical Associates (NGA), a GPP member, has developed GM-SYS and it's associated tools to work within the Oasis montaj software platform.
|
588
|
3D: Abort exiting Om 5.1.3. GT_3D Exception << Destroy3DTool >>
|
|
530
|
3D: Abort in 3D Tool while setting the default drawing plane. << CVU_Map3D::SetPlaneBaseXYZ >>
|
|
433
|
3D: Abort when deleting a plane from the 3D view; hCreat_ENUM
|
|
924
|
3D: Abort while placing line path on a 3D view. << CCTL_3DView::SetShadow >>
|
|
537
|
3D: Abort after click on "cancel" on the Progress Bar during the redraws of a 3D view.
|
|
621
|
Abort when starting up montaj. CAPP_OE::OpenWorkspace
|
|
705
|
ABORT; editing profiles (deleted some text); ViewLinkDrawSymb
|
|
423
|
ACCESS Export: Gives an error: ADO Providor error - error 1 of 1. Error desc The size of a field is tool long. Source: Microsoft JET Database Engine.
|
|
489
|
Added a new SELTYPE GX to BIGRID, which lets users select or deselect all lines of a selected type in the database to exclude tie line easily. Look for the 'Select type...' option under 'Selections'
|
|
770
|
ANOMPICK GX is now available to both 3500 and 4500 users.
|
|
517
|
ArcView Export: Using a script to export a map as a Arcview TIFF, even if you select Colour 8-bit, the file is exported as 24bit file instead.
|
|
724
|
ArcView Import: 5.1.3; Bug in Importarc.gx help files - Does the opposite of what the help file says i.e. 0 which in the help file is import to a new file or map is actually import to current and vise-versa
|
|
790
|
ASCII Import: HHMMSS Time format does not import for some formats.
|
|
744
|
CHIMERA: Chhisto.gx, 'Plot symbol legend on the current map' button and default Subtitle always reads (ppm).
|
|
792
|
CHIMERA: Importing assay data with "convert to negatives" set to yes gives error sClipToDetectionLimit_CHIMERA: Invalid Detection Limit.
|
|
819
|
CHIMERA: Modifed Rose and Pie Symbol and legend GXs to take a starting angle parameter.
|
|
743
|
CHIMERA: Subtitle of Proportional Symbol legend gives parantheses '(...)' by default.
|
|
814
|
COASTPLOT: error message: Unable to locate the GenGroupName_STR function in the geogx dynamic object.
|
|
731
|
COLORBAR.GX: colour legend bar only allows a user to save the colour distribution as an ITR. It should also have ZON
|
|
524
|
Database Editing: Display of x-axis in plot profile figure tool does not keep time, date or geographic format.
|
|
606
|
Database Editing: Error message using EDITLINE GX to edit all selected lines. << SetLineType_DB : Invalid Not Flight Line >>
|
|
635
|
Database Editing: Save and Load Database Views is not working with database profiles.
|
|
609
|
Database Editing: When size of new string channel is incorrect the channel gets created anyway. An error message is displayed but the channel can never be deleted.
|
|
525
|
ERMAPPER: Cannot display ER Mapper (ers) grids in any Oasis map with any other grids present. "sConnectDataBAND(25307): This <ers file path and name> image is being displayed using plug-in technology that does not support reprojection. Please display in it native projection."
|
|
852
|
External DB import: When importing data from Oracle databases (and other formats), fields such as Long-Lat stored in numeric [10 wide, 6 decimals eg 130.109519] are not imported in the same format ie come in as 130109519.000000. Date fields (eg 04-JUL-00) are imported as 2000.5055. Date fields are now formatted correctly and decimal fields are converted to Geosoft doubles correctly.
|
|
373
|
GM-SYS: error "The instruction at 0x77f7d4b1 referenced memory at 0x00eb00 ..... the memory could not be written."
|
|
22
|
GM-SYS: Upgrade to licensing of GM-SYS to avoid problem with corrupt gmusrid.dll
|
|
909
|
Gravity: Modified to support terrain correction for the gravity survey on the ship.
|
|
858
|
GRCALFILE.GX. Abort creating a gravity calibration file. << CDG_DGW::OnTrueOK >>
|
|
762
|
GRID2PLY GX: does not honor the grid exactly. It can be misplaced on edges by 1 cell. The POLYDRAW GX should have turned off automatic thinning of the polygon.
|
|
789
|
GRID2PLY.GX: The "Save to file/Append" option doesn't work. The file is always overwritten.
|
|
754
|
Gridknit: Abort while trying to stitch together two grids.
|
|
801
|
GRIDREPJ.GX: Abort when reprojecting a grid
|
|
973
|
GX Developer: SetLineNumber_DB GX function doesn't accept negative line numbers
|
|
725
|
IGRF.GX: Modified to support a geosoft date channel as well as a single string yy/mm/dd as the date entry.
|
|
633
|
Installation/upgrade: Abort v5.1.3 - sGetField_LTB
|
|
586
|
Installation/upgrade: If someone installs v5.1.3 (online/CD) and installs a v5.0 license, they should be prompted to upgrade their license.
|
|
306
|
Installation/upgrade: Lost licenses when upgrading have no computer ID or License ID
|
|
600
|
Installation/upgrade:Abort at startup of the software manager followed by an LTB merge error.
|
|
752
|
Installation/upgrade:Updated country listing in Software Manager.
|
|
782
|
IP: added topography to resistivity calculations
|
|
888
|
IP: Electrode locations on the IP V4-5 import are incorrect.
|
|
472
|
IP: problems importing a dump file from the Elrec IP-6 receiver with tabs as field separators
|
|
746
|
LOOKUPXX GXs The table lookup process appears to get confused between a channel named "x" and the channel currently assigned as the "X-coordinate".
|
|
763
|
MAGMAP: magmap2dfft.pdf does not open using Acrobat 4.0 'There was an error opening this document. This viewer cannot decrypt this document'
|
|
756
|
MAGMAP: there are missing advanced 1DFFT gx's; Improvements to 1DFFT manual.
|
|
661
|
Map Editing: Abort <CDOC_MAP::PopulateList>
|
|
807
|
Map Editing: Abort << CDOC_MAP::OnItemeditLineAttr >>
|
|
771
|
Map Editing: Bug with Help button in the Group Manager...it doesn't work, only F1 works, but help files are incorrect
|
|
737
|
Map Editing: Cannot edit a range classified group. Hotfixed.
|
|
828
|
Map Editing: Can't copy and paste mapinfo legends to Oasis, layer appears but is empty
|
|
950
|
Map Editing: Could not edit a symbol nor a posting group on a map. The size of the group grew enormously. Hotfix 2.
|
|
799
|
Map Editing: Enhancement: option to hide an entire view
|
|
777
|
Map Editing: Grid (with name longer than ~20 charcters) displayed on map a second time makes duplicate of itself '....._1' rather than overwriting.
|
|
821
|
Map Editing: in 5.1.2, pasting text from word doc text use to paste correctly, now text is no longer visible in 5.1.4
|
|
647
|
Map Editing: Shadow cursor with data link snaps to an offset from the flight lines on a map due to thinning This will take place when plotting flight lines. Info added to documentation.
|
|
514
|
MAPPLOT: added a new MAPPLOT translation help topic.
|
|
289
|
MAPPLOT: Maps while working at high latitudes: grid lines are plotted as straight lines instead of small circles
|
|
716
|
MAPPLOT: The scale parameter in the REFP mapplot command is not working correctly
|
|
558
|
Math Expressions: abort when trying to apply a math expression to a channel. CountBuffers_MTE
|
|
660
|
Math Expressions: Running a conditional operator to a FLOAT data type channel gives error: A C-style IF Expression of the form "exp1?exp2:exp3" must have the same type for expression 2 and 3.
|
|
492
|
Math Expressions: The conditional expression math support was broken. It now supports multiple data types and correctly handles in both modes.
|
|
658
|
NEWMAP.GX: Abort: Load_EMAP
|
|
747
|
NEWMAP.GX: Modified to allow creation of a New map from Lat, Long with a Geographic projection.
|
|
753
|
OES: users cannot run from command line due to default setting of Prompt for loading of last workspace.
|
|
802
|
PDV Export: Abort; sStartRaster_PDVXPD
|
|
670
|
Problems using menu's (OMN) that run a PDF.
|
|
788
|
Projections: "Instituto Brasiliero de Geografia e Estatistica" misnamed IGBE in ldatum.csv
|
|
785
|
Projections: added the Projection method "Egypt Blue Belt" is missing relating to the Egypt 1907 datum.
|
|
536
|
RANGRID: progress bar non existent but dialog screen exists.
|
|
831
|
RMS.GX: importing airborne data, an existing line will be overwritten by an import line of the same name
|
|
749
|
Scripting: Problems with scripts when CURRENT lines contain file names with spaces in them.
|
|
672
|
SORTX GXs: Doing a 1 channel sort on a channel named Y that is not the alloted Y coordinate does not sort gdb
|
|
666
|
Title of the gws does not get refreshed when save workspace as is applied and present gws is renamed. changed the Save Workspace As option to reopen the newly created GWS instead of the currently opened one.
|
|
624
|
TRENDDB GX: overwrites existing R0:0 and R1:0 lines. Suggestion is to prompt user for this to happen.
|
|
846
|
USGS DDF Import: It appears that the XY are OK, but the Z values are wrong.
|
|
809
|
UX-Detect: bug with the lag correction. After importing addational data is won't calculate on the new lines and on the existing line it keeps moving one more fid each time I run it
|
|
617
|
Wholeplot: Abort - Attempting to generate a drillhole section in an old project.
|
|
797
|
Wholeplot: Abort << sPlotBandDH >>
|
|
690
|
Wholeplot: Added another check box to put Hole ID at the bottom of the hole. It gets messy if you want both the Hole ID and the bottom depth at the bottom of the hole, because the overplot protection kicks in every time.
|
|
794
|
Wholeplot: Data tab data combo box items duplicated when switching between tabs and back again.
|
|
444
|
Wholeplot: Once you fill in the Data Tab for the Wholeplot Section you can check/uncheck and change but you cannot clear the datatype fields. A 'Clear all fields' would be nice.
|
|
726
|
Wholeplot: A problem because different wholeplot groups were sharing the same channels and each channel gets associated with only one group of data.
|
|
803
|
Wholeplot: Strip log depth grid lines extend beyond ends of holes and end of depth scale.
|
|
824
|
Wholeplot: The fixed vertical extent in a section map was limited to values between 1 and 10,000. Increased to 100 million.
|
|
829
|
Wholeplot: The plan map scale was limited to values between 1 and 1,000,000. Increased to 100 million.
|
|
620
|
Wholeplot:: When Closing a project, all open maps get closed, regardless as to whether they are part of that specific project or not. When the project is reopened, the maps do not reopen and only the databases are opened.
|
|
711
|
XYSET GX: does not work from script
|
|
742
|
XYZ Import: Bug in line name options causes error. << "L421.* is not a valid line name. Line names must start with a letter (a-z), digit (0-9), '_' or '-', and subsequent letters can also include periods '.'. >>
|
